Solid – In a solid the particles (ions, atoms or molecules) are packed closely together. As a result, a solid has a stable, definite shape, and a definite volume. Solids can only change their shape by force, as when broken or cut. Liquid – A liquid is a nearly incompressible fluid that conforms to the shape of its container but retains a (nearly) constant volume independent of pressure. The volume is definite if the temperature and pressure are constant. Gas – A gas is a compressible fluid. Not only will a gas conform to the shape of its container but it will also expand to fill the container.
In a gas, the molecules have enough kinetic energy so that the effect of intermolecular forces is small (or zero for an ideal gas), and the typical distance between neighboring molecules is much greater than the molecular size. A gas has no definite shape or volume, but occupies the entire container in which it is confined. A liquid may be converted to a gas by heating at constant pressure to the boiling point, or else by reducing the pressure at constant temperature. Plasma – Like a gas, plasma does not have definite shape or volume.
Unlike gases, plasmas are electrically conductive, produce magnetic fields and electric currents, and respond strongly to electromagnetic forces. Positively charged nuclei swim in a “sea” of freely-moving disassociated electrons, similar to the way such charges exist in conductive metal. In fact it is this electron “sea” that allows matter in the plasma state to conduct electricity. Non-classical states: Glass – Glass is a non-crystalline or amorphous solid material that exhibits a glass transition when heated towards the liquid state.
Glasses can be made of quite different classes of materials: inorganic networks (such as window glass, made of silicate plus additives), metallic alloys, ionic melts, aqueous solutions, molecular liquids, and polymers. Thermodynamically, a glass is in a metastable state with respect to its crystalline counterpart. The conversion rate, however, is practically zero. Crystals with some degree of disorder – A plastic crystal is a molecular solid with long-range positional order but with constituent molecules retaining rotational freedom; in an orientational glass this degree of freedom is frozen in a quenched disordered state.
Similarly, in a spin glass magnetic disorder is frozen. Liquid crystal states – Liquid crystal states have properties intermediate between mobile liquids and ordered solids. Generally, they are able to flow like a liquid, but exhibiting long-range order. For example, the nematic phase consists of long rod-like molecules such as para-azoxyanisole, which is nematic in the temperature range 118–136 °C. In this state the molecules flow as in a liquid, but they all point in the same direction (within each domain) and cannot rotate freely.
Other types of liquid crystals are described in the main article on these states. Several types have technological importance, for example, in liquid crystal displays. Magnetically ordered – Transition metal atoms often have magnetic moments due to the net spin of electrons that remain unpaired and do not form chemical bonds. In some solids the magnetic moments on different atoms are ordered and can form a ferromagnet, an antiferromagnet or a ferrimagnet. In a ferromagnet—for instance, solid iron—the magnetic moment on each atom is aligned in the same direction (within a magnetic domain).
If the domains are also aligned, the solid is a permanent magnet, which is magnetic even in the absence of an external magnetic field. The magnetization disappears when the magnet is heated to the Curie point, which for iron is 768 °C. An antiferromagnet has two networks of equal and opposite magnetic moments, which cancel each other out so that the net magnetization is zero. For example, in nickel(II) oxide (NiO), half the nickel atoms have moments aligned in one direction and half in the opposite direction. In a ferrimagnet, the two networks of magnetic moments are opposite but unequal, o that cancellation is incomplete and there is a non-zero net magnetization. An example is magnetite (Fe3O4), which contains Fe2+ and Fe3+ ions with different magnetic moments. Microphase-separated – Copolymers can undergo microphase separation to form a diverse array of periodic nanostructures, as shown in the example of the styrene-butadiene-styrene block copolymer shown at right. Microphase separation can be understood by analogy to the phase separation between oil and water. Due to chemical incompatibility between the blocks, block copolymers undergo a similar phase separation.
However, because the blocks are covalently bonded to each other, they cannot demix macroscopically as water and oil can, and so instead the blocks form nanometer-sized structures. Depending on the relative lengths of each block and the overall block topology of the polymer, many morphologies can be obtained, each its own phase of matter. Low temperature states: Superfluid – Close to absolute zero, some liquids form a second liquid state described as superfluid because it has zero viscosity (or infinite fluidity; i. e. , flowing without friction).
This was discovered in 1937 for helium, which forms a superfluid below the lambda temperature of 2. 17 K. In this state it will attempt to “climb” out of its container. It also has infinite thermal conductivity so that no temperature gradient can form in a superfluid. Placing a superfluid in a spinning container will result in quantized vortices. These properties are explained by the theory that the common isotope helium-4 forms a Bose–Einstein condensate (see next section) in the superfluid state. More recently, Fermionic condensate superfluids have been formed at even lower temperatures by the rare isotope helium-3 and by lithium-6.
Bose–Einstein condensate – In 1924, Albert Einstein and Satyendra Nath Bose predicted the “Bose–Einstein condensate” (BEC), sometimes referred to as the fifth state of matter. In a BEC, matter stops behaving as independent particles, and collapses into a single quantum state that can be described with a single, uniform wavefunction. In the gas phase, the Bose–Einstein condensate remained an unverified theoretical prediction for many years. A Bose–Einstein condensate is “colder” than a solid. It may occur when atoms have very similar (or the same) quantum levels, at temperatures very close to absolute zero (?273. 5 °C). Fermionic condensate – A fermionic condensate is similar to the Bose–Einstein condensate but composed of fermions. The Pauli exclusion principle prevents fermions from entering the same quantum state, but a pair of fermions can behave as a boson, and multiple such pairs can then enter the same quantum state without restriction. Rydberg molecule – One of the metastable states of strongly non-ideal plasma is Rydberg matter, which forms upon condensation of excited atoms. These atoms can also turn into ions and electrons if they reach a certain temperature.
In April 2009, Nature reported the creation of Rydberg molecules from a Rydberg atom and a ground state atom,confirming that such a state of matter could exist. The experiment was performed using ultracold rubidium atoms. Quantum Hall state – A quantum Hall state gives rise to quantized Hall voltage measured in the direction perpendicular to the current flow. A quantum spin Hall state is a theoretical phase that may pave the way for the development of electronic devices that dissipate less energy and generate less heat. This is a derivation of the Quantum Hall state of matter.
Strange matter – Strange matter is a type of quark matter that may exist inside some neutron stars close to the Tolman–Oppenheimer–Volkoff limit (approximately 2–3 solar masses). It may be stable at lower energy states once formed. High energy states: Color-glass condensate – Color-glass condensate is a type of matter theorized to exist in atomic nuclei traveling near the speed of light. According to Einstein’s theory of relativity, a high-energy nucleus appears length contracted, or compressed, along its direction of motion.
As a result, the gluons inside the nucleus appear to a stationary observer as a “gluonic wall” traveling near the speed of light. At very high energies, the density of the gluons in this wall is seen to increase greatly. Unlike the quark-gluon plasma produced in the collision of such walls, the color-glass condensate describes the walls themselves, and is an intrinsic property of the particles that can only be observed under high-energy conditions such as those at RHIC and possibly at the Large Hadron Collider as well.
Quark-gluon plasma – Quark-gluon plasma is a phase in which quarks become free and able to move independently (rather than being perpetually bound into particles) in a sea of gluons (subatomic particles that transmit the strong force that binds quarks together); this is similar to splitting molecules into atoms. This state may be briefly attainable in particle accelerators, and allows scientists to observe the properties of individual quarks, and not just theorize. See also Strangeness production.
Weakly symmetric matter: for up to 10?12 seconds after the Big Bang the strong, weak and electromagnetic forces were unified. Strongly symmetric matter: for up to 10?36 seconds after the Big Bang the energy density of the universe was so high that the four forces of nature — strong, weak, electromagnetic, and gravitational — are thought to have been unified into one single force. As the universe expanded, the temperature and density dropped and the gravitational force separated, a process called symmetry breaking. Quark-gluon plasma was discovered at CERN in 2000.